RESUMO O concreto é um material largamente utilizado em todo o mundo. Algumas de suas particularidades são a fissuração e a baixa resistência à tração. Assim, a adição de fibras pode ser uma alternativa viável, a fim de se minimizar a ocorrência destes efeitos. O presente estudo investigou as vantagens e desvantagens da adição de fibras de polipropileno (PP) nos materiais cimentícios e, por fim, apresentou os resultados e considerações de um estudo experimental sobre as propriedades dos compósitos de microconcreto no estado fresco e endurecido. Foram usados dois tipos de fibras: uma curta com 12 milímetros de comprimento (microfibras), e outra de 54 milímetros (macrofibras). Os teores de fibras, em relação ao volume do microconcreto, foram de 0,1%, 0,2%, 0,3% e 0,4% para a microfibra e de 0,3%, 0,4% e 0,5% para a macrofibra e para os híbridos. Estes últimos foram compostos por 30% de microfibras e 70% de macrofibras. Parte do cimento foi substituída por sílica ativa (SA) e cinza volante (CV), nas proporções de 7,5% para cada uma delas, em massa. A proporção ligante:agregados foi de 1:3, em massa. Para os agregados, foi adotada a relação de 30% de areia natural e 70% de areia artificial, em massa. Quanto ao efeito das microfibras, estas apresentaram resultados satisfatórios para adições de 0,1% no compósito com adição de microfibras e em todas as composições híbridas nas idades de 28 e 91 dias., tanto no estado fresco como no endurecido. Quanto às macrofibras, estas ocasionaram discreta redução no abatimento e na absorção, constância no percentual de ar aprisionado e melhora nos resultados no estado endurecido para os teores de 0,4% e 0,5%, em relação à mistura de referência (sem fibras).
ABSTRACT The concrete is a material widely used worldwide. Some of its particularities are cracking and low tensile strength. Thus, the addition of fibers can be a viable alternative, in order to minimize the occurrence of these effects. The present study has investigated the advantages and disadvantages of the addition of polypropylene fibers in cementitious materials and, finally, presented the results and considerations of an experimental study on the properties of microconcrete composites in the fresh and hardened state. Two types of fibers were used: a short one 12 mm long (microfibers), and another one 54 mm (macrofibers). The fiber content, in relation to the microconcrete volume, was 0.1%, 0.2%, 0.3% and 0.4% for microfiber, and 0.3%, 0.4% and 0,5% for macrofiber and hybrids. The latter were composed of 30% microfibers and 70% macrofibers. Part of the cement was replaced by silica fume (SF) and fly ash (FA), in the proportions of 7.5% for each one, by weight. The binder: aggregate ratio was 1:3 by weight. For aggregates, the ratio of 30% natural sand and 70% artificial sand, by weight, was adopted. As for the effect of the microfibers, they presented satisfactory results for additions of 0.1% in the composite with the addition of microfibers and in all the hybrid compositions at the ages of 28 and 91 days, both in the fresh and in the hardened state. As for the macrofibers, they caused a slight reduction in the slump and absorption, consistency in the percentage of trapped air and improvement in the results in the hardened state for the contents of 0.4% and 0.5%, in relation to the reference mixture (without fibers ).